How to Set Up a Changing Table, Pad and Mat Cover Together
By Mokee | Published: 2026-11-05
Category: Anleitungen
A step-by-step guide to assembling your Mokee changing table, fitting a portable changing pad, and layering a terry mat cover for a safe, organised nappy station.
Quick answer
Build the changing table first, place a portable changing pad on the top surface, then stretch a 50x70cm terry mat cover over the pad. Check that the cover’s elasticated edge grips the pad securely and that the pad sits fully within the table’s 70x50cm maximum footprint.
Why the order matters: table, then pad, then cover
Layering in this sequence keeps each item doing its own job. The table provides a stable, dedicated surface at a comfortable height. The pad adds a soft, portable layer you can move to another room or take on trips. The terry cover protects the pad and gives you a quick-change surface that can go straight into the wash.
If you put the cover directly on the table and skip the pad, you lose the portability and extra cushioning the pad provides. If you put the cover under the pad, the pad’s base can slide and the cover won’t grip properly.
What to check before you start
Unbox everything and confirm you have the table, the pad, and at least one mat cover. The Mokee changing table is designed for a mat no larger than 70x50cm, so measure your pad before assembly. The terry changing mat cover is sized 50x70cm, which matches that maximum — check that your pad is the same size or slightly smaller so the cover’s elasticated edge can tuck around it.
You will also need a Phillips screwdriver if your table requires assembly (fixings are typically included) and a clear, flat area to work. Keep the pad’s removable inner cushion nearby if your model has one.
Step-by-step: assemble your changing station
- Build the changing table: Assemble the Mokee changing table following the supplied instructions. Tighten all fixings firmly, then check that the top surface is level and the lower shelf is secure. Common mistake: leaving fixings finger-tight, which lets the table wobble when you lift your baby. Push down gently on each corner — if there is any movement, re-tighten before continuing.
- Place the changing pad on the table: Lay the changing pad centrally on the table top. If your pad has a removable padded interior, insert it before positioning. Make sure the whole pad sits within the 70x50cm maximum area and does not overhang any edge. Common mistake: centring the pad by eye without checking the edges, which can leave one side unsupported. Measure from each table edge to the pad — the gaps should be roughly equal on all four sides.
- Fit the terry mat cover over the pad: Stretch the 50x70cm terry changing mat cover over the pad, tucking the elasticated edge underneath all the way around. Smooth out any wrinkles. Common mistake: leaving a corner untucked, which lets the cover bunch up during a change. Run a finger around the entire elastic edge to confirm it is gripping the pad evenly.
- Organise the storage pockets and shelf: Fill the pad’s built-in pockets with a few nappies, a pack of wipes, and any small essentials you reach for most. Use the table’s lower shelf for bulkier items like spare nappy packs and cream tubs. Common mistake: overfilling the pockets so the pad no longer lies flat. Keep only what you need for one or two changes in the pockets; store the rest on the shelf.
- Do a final safety and comfort check: Place your baby on the station only when everything is stable. Check that the cover is smooth, the pad does not slide, and nothing sharp or heavy is within reach. Never leave your baby unattended on the changing table, even for a moment. Common mistake: assuming the table is stable because it looks level — always test it by hand first. Keep one hand on your baby at all times during changes, and store the changing pad out of reach when not in use.
Product facts that affect your setup
- Changing Table - Beech: Crafted from sustainably sourced, untreated solid beechwood with a top surface that fits a mat up to 70x50cm and a lower storage shelf. The 70x50cm limit means your pad and cover must not exceed that footprint, and the lower shelf keeps nappies and creams within arm’s reach.
Changing Table - Beech - Changing Pad With Storage Pockets - Cloudy Rib - Oatmeal: Features a removable padded interior and built-in pockets sized for nappies, wipes, and daily essentials. You can lift out the padded part for cleaning and use the pockets to keep small items organised during changes, whether at home or on the go.
Changing Pad With Storage Pockets - Cloudy Rib - Oatmeal - Terry Changing Mat Cover - 50x70cm - Ash Green: Made from OEKO-TEX® certified organic terry towelling with an elasticated edge to hold the cover in place. The elasticated edge grips the pad so the cover stays flat during changes, and the certified terry is soft against your baby’s skin.
