Midi Cot Bed With Drawer & Natural Mattress: Storage Setup Guide

By Mokee | Published: 2026-11-01

Category: How-to Guides

Set up your 140x70 cot bed drawer for smooth, safe nursery storage. Follow these steps to align the drawer, load it smartly, and keep the cot stable for years.

Quick answer

Assemble the cot frame first, then fit the drawer before adding the natural mattress. Check that the drawer glides freely and the cot stays level on your floor—this order prevents misalignment and keeps the 140x70 cot bed stable.

Why assembly order matters for the drawer

The drawer sits under the cot base, so the cot frame must be square and level before you attach it. If you add the mattress first, the extra weight makes it harder to shift the frame and align the drawer runners. Work on a flat surface and keep the fixing screws slightly loose until the drawer is in place, then tighten everything together.

A common mistake is forcing the drawer into a frame that is slightly twisted. If the drawer binds, loosen the frame bolts, adjust the cot until the drawer slides smoothly, and re-tighten. This also protects the natural mattress from uneven support later.

Choosing a spot that lets the drawer open fully

The drawer needs clear space in front to pull out. Leave at least 60 cm between the cot and any wall, wardrobe, or changing table. In small nurseries, consider placing the cot so the drawer opens toward the room rather than a corner. Stone Blue and White Beech finishes are both neutral, but the Stone Blue cot bed can show scuffs more easily in tight spots, so a little extra clearance helps.

Also check that the floor is level. A slight slope can make the drawer drift open or closed on its own. If you cannot move the cot, a thin felt pad under one corner can help, but never raise the cot so much that it becomes unstable.

Step-by-step drawer setup

Assemble the cot frame on a flat surface: Build the cot frame according to the instructions, but leave the main bolts hand-tight. Check diagonals with a tape measure—they should match within a few millimetres. Common mistake: tightening everything before the frame is square, which makes the drawer bind later. A square frame is the foundation for a smooth drawer.
Fit the drawer before the mattress: Slide the drawer into its runners and check it opens and closes without rubbing. Adjust the frame slightly if needed, then tighten all bolts. Do not force the drawer—if it sticks, loosen and re-align. Checkpoint: the drawer should glide with one hand. Test the drawer empty first; the natural mattress adds weight later.
Set the base height and add the natural mattress: Choose one of the 7 base positions—higher for a newborn, lower for a toddler. Secure the base, then place the natural mattress on top. Common mistake: adjusting the base after the drawer is loaded, which can shift the frame. Checkpoint: the mattress should sit flush with no gaps at the sides. Adjust base height before loading the drawer to avoid re-alignment.
Load the drawer evenly: Distribute weight across the drawer—nappies, bedding, and spare clothes—rather than piling everything at the front. Keep heavier items toward the back. Do not overload; if the drawer sags or scrapes, remove items. Checkpoint: the drawer should still close fully with a gentle push. Even loading protects the runners and keeps the cot stable.
Do a stability and safety check: Push the cot gently from each side—it should not wobble. Re-tighten any fixings after the first week. Keep the drawer closed when not in use and check that the cot is not placed near curtains or blind cords. Common mistake: ignoring small wobbles; fix them before your child starts pulling up. Re-check fixings after 7 days and monthly thereafter.

Product facts

Midi Cot Bed With Drawer & Natural Mattress - Stone Blue (140x70): Midi Cot Bed in Stone Blue (140 x 70) with a height-adjustable base offering 7 positions. You can set the base high for newborn access and lower it as your child grows, but adjust the base before fitting the drawer to avoid re-aligning later.
Midi Cot Bed With Drawer & Natural Mattress - Stone Blue (140x70)
Midi Cot Bed With Drawer & Natural Mattress - White Beech (140x70): Midi Cot Bed in White Beech (140 x 70) made from FSC-certified solid beechwood with eco-friendly water-based paint. Solid beechwood is sturdy, so the cot can handle a loaded drawer, but always tighten fixings after the first week of use as the wood settles.
Midi Cot Bed With Drawer & Natural Mattress - White Beech (140x70)